Have you ever wondered if you can skip the lengthy infusions, complicated methods, and just use cannabis as-is in your recipes? In this guide, you will learn how to use plain, ground decarbed cannabis in your edibles – without the need for lengthy infusions or extractions – to make quick and easy edibles at home.

A picture of ground cannabis with text that says How to Use Decarbed Cannabis in Edibles.

Article Features

  • A way to reap the whole-plant benefits of cannabis
  • No infusing required! Just decarb, incorporate, and enjoy
  • Need flower to start with? Check out my CBD and CBG cannabis flower options in my online store now shipping across the United States!
A picture of Lifter CBD hemp flower.

Why You Will Love This This Method

I was recently asked this question by a member of my Well With Cannabis Community. She says:

Ok, so is it really true? Can I decarb about 3 grams of flower and just eat it??? I don’t have to infuse oil or butter? I’m all ears!!

Audrey from the Well With Cannabis Community

My answer was:

“YES! If you like the taste and texture, you can absolutely eat decarbed cannabis. Just remember to eat it with a meal or another fat source of maximum bioavailability. And watch your portion size, 3 grams is a lot for one sitting!”

I am sure you are used to infusing flower into butter and oils or extracting it with an alcohol tincture, but the truth is, you really can eat straight cannabis.

BUT – there are a few things to know before getting started!

This guide will cover everything you need to know about how to make edibles with decarbed cannabis.

I will cover the decarb process, the importance of pairing this method with fat, and important dosing warnings, followed up with some tasty recipes to try.

The Step-By-Step Process

A 4 step photo collage showing how to grind down cannabis in a coffee grinder
  • Step 1 – Decarb your cannabis according to the time and temperature requirements for your cannabinoid of choice. Find recommendations below. You can do this in an oven or an Instant Pot.
  • Step 2 – Place the decarbed flower into a grinder.
  • Step 3 – Grind until a fine, powdery consistency is achieved.
  • Step 4 – Use a digital scale to measure an appropriate dose. Then add this fine cannabis powder to your favorite edible or store it in an airtight container for future use.

Note: complete step-by-step printable instructions are located in the recipe card below.

Taste and Texture Notes

Before adding decarbed cannabis to your edibles, it’s important to note that you will be dealing with the taste and texture of cannabis.

I know that seems like an obvious no-brainer, but many people do not like the taste of cannabis.

If that is you, you will be better off skipping this method and looking for an infusion or extraction option.

After all, that is the purpose of infusing and extracting – to separate the medicinal cannabinoids in the trichomes from the plant material.

If you don’t mind the taste of cannabis and are looking for a quicker and easier way to make edibles, adding decarbed flowers to your edibles may be the perfect solution.

As for texture, I recommend you grind your cannabis as fine as possible for the best possible outcome; a coffee grinder works great.

This essentially creates a fine cannabis powder that can be added to just about any recipe, similar to how we use onion powder or ground oregano when cooking.

Just remember not to confuse this cannabis powder with cannabis oil powder.

Decarboxylate First

If you are unfamiliar with decarboxylation, you should read my beginner’s guide first.

This simple process of baking dried cannabis in the oven helps convert cannabinoid acids to their active forms.

In simple terms, if you want the ‘high’ of THC, you will want to decarb your cannabis flower first.

Of course, THC is not the only cannabinoid that needs to be activated; you can also decarb CBD flower, CBG flower, and even decarb for CBN.

If you’re new to these cannabinoids and want to experiment, you can purchase CBD flowers and CBG flowers from my shop.

If you need a quick and easy reference for times and temperatures, here is my simple decarb chart here for you, depending on which cannabinoid you’re working with:

Decarb Times

  1. THCA → Δ9-THC – bake at 240°F/116°C for 40 minutes
  2. CBDA → CBD – bake at 240°F/116°C for 90 minutes
  3. CBGA → CBG – bake at 220°F/105°C for 60 minutes
  4. Δ9-THC → CBN – bake at 240°F/116°C for 180 minutes
A picture of cannabis before decarboxylation and what it looks like after decarboxylation.

Pair With A Fat

To get the best results possible from adding decarbed flowers to your edibles, I recommend pairing eating it with some form of fat.

According to a scientific study published in the American Journal of Translational Research, when paired with a fat source, the absorption of cannabinoids is enhanced: THC and CBD by 2.5-fold and 3-fold, respectively, compared to fat-free formulations.

This means that adding a fat source to your cannabis edibles may make them up to 2.5-3 times more potent than choosing to skip a fat source.

Now the fat source doesn’t have to be anything fancy; it can be as simple as consuming your decarbed flower with a meal. If that meal contains fat in it, you’re good to go.

Or you can add the decarbed flower to a recipe with fat, like these simple cannabis chocolates. You can get as simple or as fancy as you want with your fat source.

Just be sure to avoid eating decarbed cannabis alone on an empty stomach; some people have reported mild stomach discomfort when doing so.

Important Dosing Note

If you have never eaten just decarbed cannabis before, I want to let you know ahead of time that this can be a very potent method of consumption.

Even just a little bit of ground flower can go a long way, and I do not want you to accidentally consume too much THC and feel unwell.

Let’s look at an example for dosing purposes. Say you are working with a cannabis flower that contains 19% THC.

This means that just 1 gram of this flower contains 190mg of THC. For most people, 190mg of THC is way too much to consume in one sitting.

To put this into perspective even more, a typical teaspoon can hold over 5 grams. This means a single teaspoon of ground cannabis flower, in this example, could contain over 950mg of THC.

If you choose to use this method, I highly recommend investing in a digital scale that can measure milligrams and follow safe dosing practices.

The best way to start is to microdose; start with a dose that is 0.1 grams and work your way up as needed.

A picture of ground cannabis flower.

How To Prepare Decarbed Cannabis For Edibles

4.88 from 16 votes
In this guide, you will learn more about how you can use just plain, decarbed cannabis in your edibles – without the need for lengthy infusions or extractions – to make quick and easy, delicious edibles at home.
Prep: 40 minutes
Cook: 10 minutes
Total: 50 minutes
Servings: 1 serving

Ingredients  

Instructions 

  • Decarb your cannabis flower according to the time and temperature recommendations for your specific cannabinoid. Find recommendations in the notes section below.
  • After the decarb process is complete, add the decarbed flower to a grinder. It can be a traditional cannabis grinder, or what I recommend, a coffee grinder, for a super fine consistency.
  • You are now left with a fine cannabis powder. Either add this powder directly to your edible recipe of choice, or store it for future use.
  • To store for future use, add the ground, decarbed flower to an airtight container, like a mason jar, with a tight-fitting lid.
  • This can be stored for several weeks or even months. For long-term storage and to preserve the potency of the flower, store it in the freezer.

Notes

Important Dosing Note: This is a very powerful and potent method of consumption. If you follow this method, I recommend investing in a digital scale that can measure milligrams and following my safe dosing practices. The best way to start is to microdose; start with a dose that is 0.1 grams and work your way up as needed.
Decarb Time and Temperature Recommendations:
•  THCA to THC – bake at 240° F for 40 minutes.
•  CBDA to CBD – bake at 240°F for 90 minutes.
•  CBGA to CBG is to bake the flower at 220°F for 60 minutes.
•  THC to CBN – bake at 240°F for 180 minutes.

Nutrition

Serving: 1g, Calories: 10kcal

Additional Info

Course: How-To
Cuisine: Cannabis Recipe
Did you make this recipe or have a question?Join hundreds of members inside private Well With Cannabis Community for help, support, and to share your edible creations!

Simple Recipes To Try

From sweet to savory, there are many ways to use decarbed flowers in your favorite cannabis edible recipes.

One of the most popular ways is simply adding the decarbed flower to a batch of brownies or making a simple firecracker.

And if you want to skip the recipe altogether, check out my guide on filling cannabis capsules with flowers to make medicating easy.

Frequently Asked Questions

Is this like using AVB?

Yes, this process is similar to using already vaped bud (AVB) in edibles, but this method is more potent.

Can I use trim, leaves, or shake?

Yes, of course! Just keep in mind that trim and fan leaves tend to be less potent and contain more plant material, so you may need to use more for a higher dosage. You will also need to decarb the trim, leaves and shake as normal.

Can I use kief?

Yes, of course! Just keep in mind that kief tends to be more potent and contains less plant material, so you may need to use less for a higher dosage. This is ideal for taste and texture. You will need to decarb kief according to these directions.

Will it feel the same as consuming cannabutter or cannaoil infused recipes?

It’s hard to say how eating decarbed cannabis will make you feel, as cannabis affects us all differently. However, this is some potency loss associated with infusions and extractions. Knowing this, it is safe to assume that eating straight decarbed cannabis may be a more intoxicating experience for some.

How do I determine the dosage?

Determining the dosage should be fairly simple if you know the % levels of THC or other cannabinoids you are using. You can use my edibles dosage calculator to do the math and select ‘No Solvent Used’ when asked about the oil or alcohol used.

Shop Now

 

About Emily

Hi, I’m Emily Kyle and I teach people just like you how to use cannabis to find joy, enhance productivity, improve relationships, and naturally support your overall health and wellness.

Leave a comment

Your email address will not be published. Required fields are marked *

Recipe Rating




14 Comments

  1. Hi! I generally use cannabis that has both THC and CBD. There is no listing on the chart for decarb time for combo strains. Can you tell me how long to decarb for flower that contains ratios of both THC and CBD? Thanks!

  2. Hi Debi. For cannabis with both THC and CBD, a good rule of thumb is to decarb at 240°F for 90 minutes so you activate the CBD, but don’t cause degradation of the THC. This should effectively activate both compounds. Happy decarbing!

  3. Hi , any idea how that will work out without any fat at all, or in a light youghurt ? Oil and butter is full of saturated fat, and when that’s going to help the process alot, it’s shit for the heart health, and also the weight, as those oil contain a significant number of calories.
    I have unlimited acces to both cannabis ( thc) and hemp ( cbd) so wether i have to increase the number of used powder does not matter financially.
    Regards
    Jan

  4. Hi Jan, thanks for your comment! You’re right that fat plays a key role in the infusion process because it helps extract the cannabinoids effectively. However, you can still achieve good results with light yogurt by incorporating a small amount of healthy fats, like avocado or a bit of nut butter, which can support heart health. It’s all about finding a balance that works for you. 😊 Happy experimenting!