Are you looking for a one-pot, set-it-and-forget-it option for making cannabutter and other oil infusions? This easy, quick, and efficient method using the Instant Pot or pressure cooker will significantly decrease the smell while leaving you with a fully decarbed and infused final product. Learn how to simplify the process with this helpful guide today.
Table of Contents
Article Features
- The best method to decarb and infuse weed butter oil
- How this significantly decreases the order associated with the process
- Want to make it easy? Skip the process, buy my Bliss cannabutter instead, and have it shipped directly to your door!
Why You Will Love This Recipe
It’s no secret that I love using the crockpot for making cannabutter and other infusions, but it can be a lengthy process.
I’m constantly trying to make life easier for the cannabis enthusiasts inside my Well With Cannabis Community.
So, when I learned you could kill two birds with one stone by using the Instant Pot to decarb and infuse, I created this easy recipe to help you get started.
Not only is this process so simple, but as an added benefit, it also significantly decreases the odor associated with the decarboxylation process.
Just place all ingredients in the Instant Pot, and you can clean the house or make dinner while the cannabis is decarbing.
Then, add your oil of choice, set the slow cooker option, and get back to work or relaxing, without worrying about smelling up the entire house.
Here you will find everything you need to know for how to make your own cannabis infusions the easy way with step-by-step instructions, delicious edible recipes to try, and fully-answered FAQs for best results.
What You’ll Need
Cannabis of Choice
- Dried cannabis buds, trim, sugar leaves or kief: Use your desired amount of cannabis, ranging from 3.5 grams to 1 ounce. Check out the flower-to-oil ratio guide if you need help deciding how much to use. Next, select your preference for THC, CBD, or CBG dominant flowers. You can purchase from my online shop.
Depending on the flower you use, with this method, you can create:
- CBD cannabutter
- Kief cannabutter
- CBD oil
- CBG energy and focus oil
- CBN sleep oil
- AVB (already been vaped) oil
Butter or Oil
- Butter or ghee: Unsalted butter, clarified butter, and ghee all work great in this recipe. However, clarified butter and ghee are preferred by many because it eliminates a final step at the end. Regular butter will cause separation. Not sure how many sticks of butter to use? Start with this flower-to-oil ratio guide to help you predict the dose of your own cannabutter.
- Oil of choice: Coconut oil, olive oil, grapeseed oil, avocado oil, MCT oil, hemp seed oil, and more
Depending on the oil you use, with this method, you can create:
Equipment
- Unsalted butter
- Instant Pot
- Trivet – or a canning rack that may fit
- Mason jars – ensure you are using a canning jar for this process
- Straining equipment – coffee filter or cheese cloth
- Silicone butter mold – optional
Note: a complete list of ingredients with amounts and printable instructions is located in the recipe card below.
The Step-by-Step Process
- Step 1 – Place your desired amount of cannabis in a mason jar and add a lid to fingertip tightness (not too tight). You do not need to grind the cannabis; break it into small, popcorn-sized pieces.
- Step 2 – Place the jar on the trivet or in the steamer basket.
- Step 3 – Place the trivet or basket in the Instant Pot.
- Step 4 – Add 4 cups of water to the Instant Pot. The size of your Instant Pot matters here. If you have a larger model, you will need to add more water. Add enough water to cover the outside of the mason jars at least halfway.
- Step 5 – Secure the lid.
- Step 6 – Set the Instant Pot to cook on high pressure for 40 minutes for THC-dominant flower, 60 minutes for CBG-dominant flower, 90 minutes for CBD-dominant flower, and 180 minutes for THC flower you want to degrade into CBN.
- Step 7 – After the desired time in minutes has passed, carefully release the pressure using the quick release function or natural release.
- Step 8 – Remove the jars from the pot with oven mitts or other protection and set them aside to cool. You now have decarboxylated cannabis.
- Step 9: Once cool enough to handle, take off the lid and add your desired amount of butter or oil to the jar.
- Step 10: Add a lid and twist to fingertip tightness (not too tight).
- Step 11: Place the jars back in the trivet or steamer basket and return them to the water bath.
- Step 12: Select Slow Cook – LOW mode and set it for 4 hours.
- Step 13: While the butter is infusing, prepare your straining area. Whether it be a paper filter and funnel, cheesecloth, French press, or a simple coffee filter, you will want to set up a straining station to separate the plant matter.
- Step 14: After 4 hours, remove the jars from the Instant Pot. Once cool enough to handle, strain the butter with your method of choice. You can save the leftover cannabis pulp for use in future recipes.
- Step 15: Add the strained butter or oil to whatever jar you would like to store it in. If making butter, place the container in the refrigerator and allow it to cool completely. You will need to drain off the milk solids at the end of the process.
- Step 16: Enjoy your cannabis-infused butter!
Note: complete step-by-step printable instructions are located in the recipe card below.
Storage Instructions
Store the butter in an airtight container like a sealed mason jar in the refrigerator according to the expiration date on the butter you used.
It can be stored for a long time if you store it in the freezer.
Depending on how it was prepared, infused oil can be stored at room temperature for several months, but it should be kept in a cool, dark place.
If you are storing the butter in the fridge or freezer, never use the microwave to soften or thaw the butter, as it could destroy the cannabinoids and ruin the final product.
Learn how to store edibles here.
Choose The Right Decarb Time
Each cannabinoid decarboxylates at a different temperature, so it’s essential to select the appropriate time based on the flower you have.
Use this guide to select the decarb time that is right for you.
Decarb Times
- THCA โ ฮ9-THC – bake at 240ยฐF/116ยฐC for 40 minutes
- CBDA โ CBD – bake at 240ยฐF/116ยฐC for 90 minutes
- CBGA โ CBG – bake at 220ยฐF/105ยฐC for 60 minutes
- ฮ9-THC โ CBN – bake at 240ยฐF/116ยฐC for 180 minutes
Notes and Expert Tips
- When making your own batch of Instant Pot Cannabutter, know that you will end up with less butter than you started with. This is normal because you will remove the milk solids and evaporate the excess water during the process.
- While the most common method is to use unsalted butter, using clarified butter or ghee eliminates the need to clarify your butter and strain milk solids.
- If you are doing an oil infusion, you can optionally add in lecithin. Do NOT add this if infusing butter.
- Know that using different strains can result in different experiences from each batch of cannabis infused-butter.
- One of the best ways to make a more potent cannabutter or oil by adding decarbed kief or cannabis concentrates like distillate or FECO.
- Just want to decarb but NOT infuse? Check out this simple guide for how to decarboxylate cannabis in an Instant Pot.
- One of the most beautiful things about this recipe is saving the leftover plant matter to make other cannabis edibles. One of the easiest ways is to throw it in your favorite sauce or salad dressings.
- If you use butter molds, I recommend using a spoon to get the pure, infused melted butter into the first full stick of the mold. You will only need to remove the milk solids from one stick.
- Ready to bake your favorite weed brownies and cookies? Have no fear; it is OK to bake your homemade cannabutter at higher temperatures.
- Looking for more recipes? Check out this cannabutter board, these 25 cannabutter recipes, or these tasty no-bake cannabutter recipes.
Instant Pot Cannabutter or Oil Infusions
Ingredients
- ยฝ ounce dried cannabis flower, buds, trim, or kief (14 grams)
- 2 sticks unsalted butter (236 grams)
Instructions
- Place your desired amount of cannabis in a mason jar and add a lid to fingertip tightness (not too tight). You do not need to grind the cannabis, just break it up into small, popcorn-sized pieces.
- Place the jar on the trivet or in the steamer basket and place the trivet or basket in the Instant Pot.
- Add 4 cups of water to the Instant Pot.ย If you have a larger IP, you may need to add more water. Add enough water to cover the outside of theย mason jars at leastย halfway.ย
- After your selected time, carefully release the pressure. Remove the jars from the pot and set them aside to cool. When cool enough to handle, add your desired amount of butter or oil to the jar.
- Add a lid and twist to fingertip tightness (not too tight). Place the jars back in the trivet or steamer basket and return them to the water bath. Select Slow Cook mode on LOW and set it for 4 hours.
- While the butter is infusing, prepare your straining area. Whether it be aย paper filterย andย funnel,ย cheesecloth,ย French press, or a simpleย coffee filter, you will want to set up a straining station to separate the plant matter from the butter or oil.
- After 4 hours, remove the jars from the Instant Pot. Once cool enough to handle, strain the butter with your method of choice. You can save theย leftover cannabis pulpย for use in future recipes.
- Add the strained butter or oil to whatever jar you would like to store it in. If making infused oil, the process is over.
- If making butter, you will need to drain off the milk solids at the end of the process.ย Place the container in the refrigerator and allow it to cool completely. During refrigeration, the infused butter will harden and solidify. Remove the solid block of butter and drain the remaining liquid which is the unwanted, leftover water and milk solids.
- Store this in the refrigerator according to the expiration date on the butter you used, or store for even longer in the freezer.
Nutrition
Frequently Asked Questions
No worries, there’s nothing wrong with the old-fashioned way! A great alternative could include aย crock pot, aย stove top, or anย infusion machine.
Yes, a true cannabis lover knows that if you want the activated benefits of cannabinoids like THC or CBD, you need to decarb first. This is because raw cannabis or fresh, raw weed contains cannabinoid acids like THCA or CBDA. The process ensures your end result, decarbed weed, contains the “good stuff” or THC and CBD you want. If you accidentally forget to decarb before adding in your cup of butter or oil, don’t worry, you didn’t just ruin those precious marijuana flower buds. Instead, you will just need a longer cooking time of 6-8 hours.
It depends on how potent you want your end product to be and how much cannabutter you want to add to a specific recipe. For a less potent product, add more butter. For a more potent product, add less. Remember, how much weed you use will have a big impact, too. Follow myย cannabis flower-to-oil ratio chartย to make a batch size perfect for you. If you’re usingย trimย orย kief, adjust accordingly. If you want a very potent product, makeย kief butterย instead.
Using up your cannabutter is certainly the most exciting part of this recipe! From sweet to savory,ย check them out hereย or simply swap your cannabutter for regular butter in your favorite recipes.ย
No worries, if you’re unhappy with how your cannabutter turned out the first time, you can follow my guide to fix weak cannabutter. Keep in mind the color does not indicate potency.
Check out my beginner’s blog posts and join the Well With Cannabis Community. for additional support and resources.
Recipes to Use Up Your Cannabutter
Ready to make the most amazing infusions with the help of the Instant Pot cannabutter you just made! You’re in the right place for tasty, delicious recipes.
Articles & How-To Guides
Tasty No-Bake Edibles Made With Cannabutter
Articles & How-To Guides
25+ Amazing Recipes Using Cannabutter
All Things Cannabutter
25+ Recipes with Cannabutter For Your Sweet Tooth
Cannabis Sides & Snack Recipes
So, in all the chaos around my home, I forgot to put the oil in after I decarbed. Just moving too fast and slow cooked it. Will it be overdone?
Thanks for all you do!
Hi Chrystal. Don’t worry! Forgetting to add the oil after decarbing happens to the best of us. Although slow cooking without oil may result in a slightly different outcome, it’s unlikely to be overdone. Your final product will most likely have sleepier effects, but you can infuse your oil as normal.Happy cooking!
So water got in my jars during the decarbโฆ did I ruin it??
Hi Kd. You definitely didn’t ruin it, but the decarboxylation process may not have gone 100%. How much water got into the jars? Did the flower get soaked? Have you decarbed before? How does the flower look and feel in comparison to other decarb batches you’ve done? If the buds didn’t get saturated in water, I don’t think you have anything to worry about. Does the flower look darker and feel crispier? If there’s any concern, you can always run another decarb cycle. I hope this helps!
HI Stephen. When working with cannabutter, you want to avoid direct heating like microwaving to preserve its potency. Instead, use it in recipes that require gentle heating, such as baking or sautรฉing, to infuse dishes with cannabis effectively. This guide will help give you ideas and recipes on how to use your cannabutter: =25+ Amazing Recipes Using Cannabutter.
if you are not supposed to microwave or heat cannabutter how can you cook with it?
I had a major problem when following recipe I couldn’t see anyone else had…. I am using mason jars, and when filling up with water as soon as the water got about half way up the jars on the side they started to flip, and water got in the top.
I tried to get the water out… but did anyone find the same issue that the jars flip once water is half filled up them? How did you fix? I added a couple of empty half full mason jars on the sides to stop them flipping. Hopefully they stay upright. Will find out in 40m after decarb I guess…
Hi Justin. Thank you for reaching out with your issue. You’re not alone in facing this issue, and I’m impressed with your ingenuity in using empty half-filled mason jars to keep them upright. That’s a clever solution!
Another method could be to use a steamer basket to keep the jars steady. This helps to distribute the heat evenly and prevent the jars from moving around too much.
You could also try reducing the amount of water you add to the Instant Pot. Four cups is usually sufficient to generate enough steam pressure without causing the jars to flip. The water level doesn’t need to reach halfway up the jars; it just needs to be deep enough to generate steam.
Finally, ensure the lids on your mason jars are screwed on “fingertip tight”, meaning they’re tight enough to prevent water from getting in, but loose enough to allow pressure to escape.
I hope these tips help for your next decarb session. Please let us know how it turns out and if you have any other questions. We’re here to help!
Happy decarbing!
I am in the middle of infusing Coconut Oil. I did grind the flower after decarb. Is this a problem when infusing? I am using an Instant Pot
Thank you
Hi there, Ronda! Regarding your question, no worries at all. Grinding the flower after decarboxylation is just fine. Just remember to strain the mixture well after infusing to ensure a smooth final product. Happy infusing, and I can’t wait to hear how your coconut oil turns out!